GEZE Slimdrive EMD-F-IS

Slimdrive EMD F-IS * Electromechanical swing door system for double leaf fire and smoke protection doors with closing sequence control

  • Closing force with variable adjustment EN3-6
  • Opening and closing speed can be individually adjusted
  • Mechanical latching action when operated without current, and electrical latching action in regular operation, which accelerates the door shortly before the closed position
  • Mechanical and electrical closing sequence control holds the active leaf in the waiting position until the passive leaf is closed
  • Low-energy function opens and closes the door with reduced speed, fulfilling the highest safety requirements
  • Servo function for motorized support when manually opening the door
Show more
  • Vestibule function controls the opening and closing of two consecutive doors (interlocking door system)
  • Obstacle detection detects obstacles through contact and stops the opening or closing process
  • Automatic reversing detects an obstacle and returns to the opening position
  • Push & Go function triggers the automatic drive components following light manual pressure on the door leaf
  • Drive can be used with roller guide rail or link arm
Contact us

Electromechanical swing door system for double leaf fire and smoke protection doors with closing sequence control

Application Areas

  • Fire and smoke protection doors
  • Double leaf right and left single-action doors
  • Single-action doors up to 2800 mm hinge clearance, 1400 mm leaf width and 230 kg weight
  • Minimum hinge clearance 1500 mm, minimum leaf width 750 mm
  • Interior and exterior doors that must close in the correct sequence even without power
  • Transom installation hinge and opposite hinge side

Product specifications

Slimdrive EMD F-IS
Height 70 mm
Depth 121 mm
Leaf weight (max.) 230 kg
Hinge clearance (min.-max.) 2-leaf 1500 mm - 2800 mm
Leaf width (min.-max.) 750 mm - 1400 mm
Reveal depth (max.)* 400 mm
Door overlap (max.)* 30 mm
Drive type Electromechanical
Opening angle (max.) 130 °
Spring pre-load** EN3 - EN6
Z-variant (pulling) No
Z-variant (pushing) No
DIN left Yes
DIN right Yes
Installation in the door leaf No
Installation in the door frame No
Transom installation opposite hinge side with link arm Yes
Transom installation opposite hinge side with roller guide rail Yes
Transom installation opposite hinge side with guide rail No
Transom installation hinge side with guide rail No
Transom installation hinge side with roller guide rail Yes
Transom installation opposite hinge side with guide rail on all-glass doors No
Transom installation hinge side with guide rail on all-glass doors No
Door leaf installation opposite hinge side with guide rail No
Door leaf installation opposite hinge side with roller guide rail No
Door leaf installation hinge side with guide rail No
Door leaf installation hinge side with roller guide rail No
Door leaf installation hinge side with link arm No
Mechanical latching action Yes
Electrical latching action Yes
Electrical closing sequence control Yes
Mechanical closing sequence control Yes
Disconnection from mains Cable plug connection
Activation delay (max.) 20 s
Operating voltage 230 V
Frequency of supply voltage 50 Hz
Power rating 230 W
Power supply for external consumers (24 V DC) 1000 mA
Operating temperature -15 °C - 50 °C
IP rating IP20
Modes of operation Off, Automatic, Permanently open, Shop closing, Night
Type of function Fully automatic
Automatic function Yes
Low-energy function Yes
function smart swing No
Servo function Yes
Key function Yes
Inverse function (opening by spring force) No
Vestibule function Yes
Obstacle detection Yes
Automatic reversal when an obstacle is detected Yes
Push & Go adjustable
Operation Programme switch DPS, Programme switch integrated in the drive
Parameter setting GEZEconnects (PC + Bluetooth), ST 220 service terminal, Programme switch DPS
Approvals DIN 18650, DIN 18263-4, EN 1158:1997/A1:2002/AC:2006, EN 16005
For fire resistance doors Yes
Integrated smoke switch No
Use on fire and smoke protection doors (F-variant) No

Downloads

Contact

GEZE Central +43-6225-87180 - 0 Hotline for architects +43-6225-87-180-109 GEZE Service +43-6225-87180 - 900